Unlocking the slides mini-game

Twenty hidden slides are scattered through the main game; each one is marked in the walkthrough where it appears. Collecting all 20 unlocks 20 levels of a light-beam mini-game in the main menu.
- Collect all 20 slides in the main game. The last one, on Samuel's kitchen counter right of the toaster, triggers "You collected all the slides and unlocked 20 levels of an extra mini-game. Go to the BONUS section in the main menu to find them." On the main menu this is Extras > Diascope.
- From the main menu choose Extras > Diascope. The slides sit in a rack of five columns and four rows, in level order from left to right and top to bottom; solved slides show a tick.
- Each level is a board of green crystals with an emitter on the left frame and a receiver on the right frame. Tap a crystal to turn it; the light beam bends where the crystals point. A hint button and a coin-priced skip button are available on the boards.
Slide level 1

Rotate crystals until the beam runs from the emitter on the left frame to the receiver on the right frame. The starting orientation of each crystal is not listed here, so copy the beam path in the solved board rather than counting taps.
- In the Diascope slide rack, open slide 1 (top row, first from the left).
- Tap each crystal until it points the same way as in the solved-board image below, so the beam path matches: it leaves the emitter, passes through every crystal on the board, bending where each one points, and enters the receiver. If a crystal is still dark, the path is not finished yet. The board flashes and the slide gets a tick in the rack.

Level 1 solved: follow the beam from the left emitter through every crystal to the receiver on the right.
Slide level 2

Rotate crystals until the beam runs from the emitter on the left frame to the receiver on the right frame. The starting orientation of each crystal is not listed here, so copy the beam path in the solved board rather than counting taps.
- In the Diascope slide rack, open slide 2 (top row, second from the left).
- Tap each crystal until it points the same way as in the solved-board image below, so the beam path matches: it leaves the emitter, passes through every crystal on the board, bending where each one points, and enters the receiver. If a crystal is still dark, the path is not finished yet. The board flashes and the slide gets a tick in the rack.

Level 2 solved: follow the beam from the left emitter through every crystal to the receiver on the right.
Slide level 3

Rotate crystals until the beam runs from the emitter on the left frame to the receiver on the right frame. The starting orientation of each crystal is not listed here, so copy the beam path in the solved board rather than counting taps.
- In the Diascope slide rack, open slide 3 (top row, third from the left).
- Tap each crystal until it points the same way as in the solved-board image below, so the beam path matches: it leaves the emitter, passes through every crystal on the board, bending where each one points, and enters the receiver. If a crystal is still dark, the path is not finished yet. The board flashes and the slide gets a tick in the rack.

Level 3 solved: follow the beam from the left emitter through every crystal to the receiver on the right.
Slide level 4

Rotate crystals until the beam runs from the emitter on the left frame to the receiver on the right frame. The starting orientation of each crystal is not listed here, so copy the beam path in the solved board rather than counting taps.
- In the Diascope slide rack, open slide 4 (top row, fourth from the left).
- Tap each crystal until it points the same way as in the solved-board image below, so the beam path matches: it leaves the emitter, passes through every crystal on the board, bending where each one points, and enters the receiver. If a crystal is still dark, the path is not finished yet. The board flashes and the slide gets a tick in the rack.

Level 4 solved: follow the beam from the left emitter through every crystal to the receiver on the right.
Slide level 5

Rotate crystals until the beam runs from the emitter on the left frame to the receiver on the right frame. The starting orientation of each crystal is not listed here, so copy the beam path in the solved board rather than counting taps.
- In the Diascope slide rack, open slide 5 (top row, fifth from the left).
- Tap each crystal until it points the same way as in the solved-board image below, so the beam path matches: it leaves the emitter, passes through every crystal on the board, bending where each one points, and enters the receiver. If a crystal is still dark, the path is not finished yet. The board flashes and the slide gets a tick in the rack.

Level 5 solved: follow the beam from the left emitter through every crystal to the receiver on the right.
Slide level 6

Rotate crystals until the beam runs from the emitter on the left frame to the receiver on the right frame. The starting orientation of each crystal is not listed here, so copy the beam path in the solved board rather than counting taps.
- In the Diascope slide rack, open slide 6 (second row, first from the left).
- Tap each crystal until it points the same way as in the solved-board image below, so the beam path matches: it leaves the emitter, passes through every crystal on the board, bending where each one points, and enters the receiver. If a crystal is still dark, the path is not finished yet. The board flashes and the slide gets a tick in the rack.

Level 6 solved: follow the beam from the left emitter through every crystal to the receiver on the right.
Slide level 7

Rotate crystals until the beam runs from the emitter on the left frame to the receiver on the right frame. The starting orientation of each crystal is not listed here, so copy the beam path in the solved board rather than counting taps.
- In the Diascope slide rack, open slide 7 (second row, second from the left).
- Tap each crystal until it points the same way as in the solved-board image below, so the beam path matches: it leaves the emitter, passes through every crystal on the board, bending where each one points, and enters the receiver. If a crystal is still dark, the path is not finished yet. The board flashes and the slide gets a tick in the rack.

Level 7 solved: follow the beam from the left emitter through every crystal to the receiver on the right.
Slide level 8

Rotate crystals until the beam runs from the emitter on the left frame to the receiver on the right frame. The starting orientation of each crystal is not listed here, so copy the beam path in the solved board rather than counting taps.
- In the Diascope slide rack, open slide 8 (second row, third from the left).
- Tap each crystal until it points the same way as in the solved-board image below, so the beam path matches: it leaves the emitter, passes through every crystal on the board, bending where each one points, and enters the receiver. If a crystal is still dark, the path is not finished yet. The board flashes and the slide gets a tick in the rack.

Level 8 solved: follow the beam from the left emitter through every crystal to the receiver on the right.
Slide level 9

Rotate crystals until the beam runs from the emitter on the left frame to the receiver on the right frame. The starting orientation of each crystal is not listed here, so copy the beam path in the solved board rather than counting taps.
- In the Diascope slide rack, open slide 9 (second row, fourth from the left).
- Tap each crystal until it points the same way as in the solved-board image below, so the beam path matches: it leaves the emitter, passes through every crystal on the board, bending where each one points, and enters the receiver. If a crystal is still dark, the path is not finished yet. The board flashes and the slide gets a tick in the rack.

Level 9 solved: follow the beam from the left emitter through every crystal to the receiver on the right.
Slide level 10

Rotate crystals until the beam runs from the emitter on the left frame to the receiver on the right frame. The starting orientation of each crystal is not listed here, so copy the beam path in the solved board rather than counting taps.
- In the Diascope slide rack, open slide 10 (second row, fifth from the left).
- Tap each crystal until it points the same way as in the solved-board image below, so the beam path matches: it leaves the emitter, passes through every crystal on the board, bending where each one points, and enters the receiver. If a crystal is still dark, the path is not finished yet. The board flashes and the slide gets a tick in the rack.

Level 10 solved: follow the beam from the left emitter through every crystal to the receiver on the right.