CASE INDEX
SLIDES BONUS

Slide level 11

Slide level 11 light-beam board with green crystals on a stone grid, emitter pipe on the left frame and receiver pipe on the right frame
Level 11 as it opens: the beam lights only the crystals already lined up with the emitter on the left.

Rotate crystals until the beam runs from the emitter on the left frame to the receiver on the right frame. The starting orientation of each crystal is not listed here, so copy the beam path in the solved board rather than counting taps.

  1. In the Diascope slide rack, open slide 11 (third row, first from the left).
  2. Tap each crystal until it points the same way as in the solved-board image below, so the beam path matches: it leaves the emitter, passes through every crystal on the board, bending where each one points, and enters the receiver. If a crystal is still dark, the path is not finished yet. The board flashes and the slide gets a tick in the rack.
    Solved slide level 11 board with the green beam running from the left emitter through every crystal to the right receiver
    Level 11 solved: follow the beam from the left emitter through every crystal to the receiver on the right.
SLIDES BONUS

Slide level 12

Slide level 12 light-beam board with green crystals on a stone grid, emitter pipe on the left frame and receiver pipe on the right frame
Level 12 as it opens: the beam lights only the crystals already lined up with the emitter on the left.

Rotate crystals until the beam runs from the emitter on the left frame to the receiver on the right frame. The starting orientation of each crystal is not listed here, so copy the beam path in the solved board rather than counting taps.

  1. In the Diascope slide rack, open slide 12 (third row, second from the left).
  2. Tap each crystal until it points the same way as in the solved-board image below, so the beam path matches: it leaves the emitter, passes through every crystal on the board, bending where each one points, and enters the receiver. If a crystal is still dark, the path is not finished yet. The board flashes and the slide gets a tick in the rack.
    Solved slide level 12 board with the green beam running from the left emitter through every crystal to the right receiver
    Level 12 solved: follow the beam from the left emitter through every crystal to the receiver on the right.
SLIDES BONUS

Slide level 13

Slide level 13 light-beam board with green crystals on a stone grid, emitter pipe on the left frame and receiver pipe on the right frame
Level 13 as it opens: the beam lights only the crystals already lined up with the emitter on the left.

Rotate crystals until the beam runs from the emitter on the left frame to the receiver on the right frame. The starting orientation of each crystal is not listed here, so copy the beam path in the solved board rather than counting taps.

  1. In the Diascope slide rack, open slide 13 (third row, third from the left).
  2. Tap each crystal until it points the same way as in the solved-board image below, so the beam path matches: it leaves the emitter, passes through every crystal on the board, bending where each one points, and enters the receiver. If a crystal is still dark, the path is not finished yet. The board flashes and the slide gets a tick in the rack.
    Solved slide level 13 board with the green beam running from the left emitter through every crystal to the right receiver
    Level 13 solved: follow the beam from the left emitter through every crystal to the receiver on the right.
SLIDES BONUS

Slide level 14

Slide level 14 light-beam board with green crystals on a stone grid, emitter pipe on the left frame and receiver pipe on the right frame
Level 14 as it opens: the beam lights only the crystals already lined up with the emitter on the left.

Rotate crystals until the beam runs from the emitter on the left frame to the receiver on the right frame. The starting orientation of each crystal is not listed here, so copy the beam path in the solved board rather than counting taps.

  1. In the Diascope slide rack, open slide 14 (third row, fourth from the left).
  2. Tap each crystal until it points the same way as in the solved-board image below, so the beam path matches: it leaves the emitter, passes through every crystal on the board, bending where each one points, and enters the receiver. If a crystal is still dark, the path is not finished yet. The board flashes and the slide gets a tick in the rack.
    Solved slide level 14 board with the green beam running from the left emitter through every crystal to the right receiver
    Level 14 solved: follow the beam from the left emitter through every crystal to the receiver on the right.
SLIDES BONUS

Slide level 15

Slide level 15 light-beam board with green crystals on a stone grid, emitter pipe on the left frame and receiver pipe on the right frame
Level 15 as it opens: the beam lights only the crystals already lined up with the emitter on the left.

Rotate crystals until the beam runs from the emitter on the left frame to the receiver on the right frame. The starting orientation of each crystal is not listed here, so copy the beam path in the solved board rather than counting taps.

  1. In the Diascope slide rack, open slide 15 (third row, fifth from the left).
  2. Tap each crystal until it points the same way as in the solved-board image below, so the beam path matches: it leaves the emitter, passes through every crystal on the board, bending where each one points, and enters the receiver. If a crystal is still dark, the path is not finished yet. The board flashes and the slide gets a tick in the rack.
    Solved slide level 15 board with the green beam running from the left emitter through every crystal to the right receiver
    Level 15 solved: follow the beam from the left emitter through every crystal to the receiver on the right.
SLIDES BONUS

Slide level 16

Slide level 16 light-beam board with green crystals on a stone grid, emitter pipe on the left frame and receiver pipe on the right frame
Level 16 as it opens: the beam lights only the crystals already lined up with the emitter on the left.

Rotate crystals until the beam runs from the emitter on the left frame to the receiver on the right frame. The starting orientation of each crystal is not listed here, so copy the beam path in the solved board rather than counting taps.

  1. In the Diascope slide rack, open slide 16 (bottom row, first from the left).
  2. Tap each crystal until it points the same way as in the solved-board image below, so the beam path matches: it leaves the emitter, passes through every crystal on the board, bending where each one points, and enters the receiver. If a crystal is still dark, the path is not finished yet. The board flashes and the slide gets a tick in the rack.
    Solved slide level 16 board with the green beam running from the left emitter through every crystal to the right receiver
    Level 16 solved: follow the beam from the left emitter through every crystal to the receiver on the right.
SLIDES BONUS

Slide level 17

Slide level 17 light-beam board with green crystals on a stone grid, emitter pipe on the left frame and receiver pipe on the right frame
Level 17 as it opens: the beam lights only the crystals already lined up with the emitter on the left.

Rotate crystals until the beam runs from the emitter on the left frame to the receiver on the right frame. The starting orientation of each crystal is not listed here, so copy the beam path in the solved board rather than counting taps.

  1. In the Diascope slide rack, open slide 17 (bottom row, second from the left).
  2. Tap each crystal until it points the same way as in the solved-board image below, so the beam path matches: it leaves the emitter, passes through every crystal on the board, bending where each one points, and enters the receiver. If a crystal is still dark, the path is not finished yet. The board flashes and the slide gets a tick in the rack.
    Solved slide level 17 board with the green beam running from the left emitter through every crystal to the right receiver
    Level 17 solved: follow the beam from the left emitter through every crystal to the receiver on the right.
SLIDES BONUS

Slide level 18

Slide level 18 light-beam board with green crystals on a stone grid, emitter pipe on the left frame and receiver pipe on the right frame
Level 18 as it opens: the beam lights only the crystals already lined up with the emitter on the left.

Rotate crystals until the beam runs from the emitter on the left frame to the receiver on the right frame. The starting orientation of each crystal is not listed here, so copy the beam path in the solved board rather than counting taps.

  1. In the Diascope slide rack, open slide 18 (bottom row, third from the left).
  2. Tap each crystal until it points the same way as in the solved-board image below, so the beam path matches: it leaves the emitter, passes through every crystal on the board, bending where each one points, and enters the receiver. If a crystal is still dark, the path is not finished yet. The board flashes and the slide gets a tick in the rack.
    Solved slide level 18 board with the green beam running from the left emitter through every crystal to the right receiver
    Level 18 solved: follow the beam from the left emitter through every crystal to the receiver on the right.
SLIDES BONUS

Slide level 19

Slide level 19 light-beam board with green crystals on a stone grid, emitter pipe on the left frame and receiver pipe on the right frame
Level 19 as it opens: the beam lights only the crystals already lined up with the emitter on the left.

Rotate crystals until the beam runs from the emitter on the left frame to the receiver on the right frame. The starting orientation of each crystal is not listed here, so copy the beam path in the solved board rather than counting taps.

  1. In the Diascope slide rack, open slide 19 (bottom row, fourth from the left).
  2. Tap each crystal until it points the same way as in the solved-board image below, so the beam path matches: it leaves the emitter, passes through every crystal on the board, bending where each one points, and enters the receiver. If a crystal is still dark, the path is not finished yet. The board flashes and the slide gets a tick in the rack.
    Solved slide level 19 board with the green beam running from the left emitter through every crystal to the right receiver
    Level 19 solved: follow the beam from the left emitter through every crystal to the receiver on the right.
SLIDES BONUS

Slide level 20

Slide level 20 light-beam board with green crystals on a stone grid, emitter pipe on the left frame and receiver pipe on the right frame
Level 20 as it opens: the beam lights only the crystals already lined up with the emitter on the left.

Rotate crystals until the beam runs from the emitter on the left frame to the receiver on the right frame. The starting orientation of each crystal is not listed here, so copy the beam path in the solved board rather than counting taps.

  1. In the Diascope slide rack, open slide 20 (bottom row, fifth from the left).
  2. Tap each crystal until it points the same way as in the solved-board image below, so the beam path matches: it leaves the emitter, passes through every crystal on the board, bending where each one points, and enters the receiver. If a crystal is still dark, the path is not finished yet. The board flashes and the slide gets a tick in the rack.
    Solved slide level 20 board with the green beam running from the left emitter through every crystal to the right receiver
    Level 20 solved: follow the beam from the left emitter through every crystal to the receiver on the right.

In this part